1) *NEW* 15250-1BLR, 400A, Ind. Heavy Duty, Battery Disconnect Switch **Cheap**

Description

1) **NEW** , Eaton, Bussmann, Cooper, USD Products. **Cheap**
400A Heavy Duty Battery Disconnect.
#15250-1BLR, 15250-1B
This battery disconnect is new. It was a spare from a Truck & RV maintenance facility that is no longer needed.
These disconnects are heavy duty, industrial rated. 400A.
The 15250-1BLR, 15250-1B disconnect is sold under numerous brand names.
Eaton, Bussmann, Cooper, USD Products, Littlefuse ect.
These disconnect switches may some slight dust, a slight scuff or a slight scratch on them from being stored in inventory.
This will not effect their usefulness at all.
If this is a concern for you. Then this auction is NOT for you!
I am stating this because I do not want to cause anyone to get "stressed out" when the disconnect switch arrives and possibly has some slight dust, a slight scuff or a slight scratch on it.
If you have this tendency to have a "stress fit" over little issues like some slight dust ect.
I have a solution for you!
Go out and have a "good pull" off of the Vodka bottle!
But do not go out and have a "good pull" and then come back and buy this disconnect!
Because the slight dust, a slight scuff or a slight scratch may be there on the disconnect. And then,  when the disconnect arrives and you have inspected it with your magnifying glass. And do in deed find a very slight cosmetic issue on the switch. You will have your "anxiety attack" on steroids all over again!
For a permanent solution to your problem.
You need to go out and find a tall cliff and jump off!
But Do Not have a "good pull" off of the Vodka bottle before you jump!
That would be a waste of good vodka!
This disconnect is intended for a certified electrical mechanic.
Not at all for the "I can do that", "Shade Tree", "Want to be" or "Weekend Warrior" mechanic.
If this is you. Do not buy this disconnect!
Face it. You type of guys messed up early in life when you let your mother replace your bicycle because the chain fell off!
And also, when you let your dad replace his extension cord because you pull the end off. All because you were to lazy to walk over and disconnect the cord at the outlet. And at that point you did not even think of putting a new end on for him to correct your screw up!
So, now do not think that you can install a 400A disconnect switch! You will probably hook up the cables backward and mount it upside down and then try to claim it is defective.
This disconnect switch is used on Automotive, Truck, RV, Motorhomes, Motor Coaches, Travel Trailers, Agricultural, Industrial, Construction, Marine and Stationary Engine applications.
•EATON Bussmann Series 15250-1BLR, 15250-1B Battery Disconnect Switch
•Category: Disconnect Switches
•Manufacturer: EATON
• Switch Type: Mechanical
• Amp Rating: 400A
• Max Volts: 50V
• Contact Action: On-Off
• Mounting Bracket included
• Terminal : 1/2-13 thread tin plated stud
• Dimensions: 8" W x 4.19" H
• Non-fused current interrupt disconnect
• Opens circuit between a battery and the complete electrical load
• Max surge 2,000 amps on 20% duty, with 5 seconds on time
• Recommended mounting on negative battery post
Contact Action: On-Off
Current Rating: 400A
Amps: 400A
Max. Voltage: 50V
Type/Series: Battery Disconnect
USD PRODUCTS / COOPER 15250-1LBR  ON-OFF 400 AMP CONTINUOS
Bussmann battery disconnect SP106043, International 15250
Applications: A non-fused current interrupt disconnect designed for
opening the circuit between a battery and the complete electrical load of a
battery-powered system.
Rating: 400A continuous,. 50Vac/Vdc. Vehicle cranking and max. surge
currents to 2000A (based on 20% duty cycle with ON times of 5 seconds
max.).
EATON BUSSMANN SERIES  15250-1BLR
Battery Disconnect Switch, 400A, 50VAC/DC, 1/2-13 Thread Copper Alloy Stud Termination, Non-Fused
EATON BUSSMANN SERIES
Manufacturer # 15250-1BLR
CBC #: 05171292979
Product Description
Battery Disconnects: Type - Battery Disconnect Switch; Current Rating - Continuous - 400A; Voltage Rating - 50V AC/DC; Current Rating - Max. Surge - 2000A; Fuse - Non-Fused; Termination Type - Copper Alloy Stud; Termination Size - 1/2-13 Thread; Torque Rating - 420 in-lbs (47.5Nm); Mounting - Bracket (included); Handle Type - Flat Shaft, Inline Knob; Handle Size - 79.4" (3.12 mm) Radius; Dimensions - 8.00 x 4.19" (203.2x106.4 mm) Base; Additional Information - Lubricant-filled Body with Silicone Sealant; Manufacturer Series - Series 15250
Additional: Lubricant-filled Body with Silicone Sealant
Temperature Rating: –40°F (–40°C) to 150°F (65°C).
Termination: 1/2-13 Copper alloy stud.
Torque Rating: 420 in-lbs (47.5Ntm) max.
Mounting Torque Rating: With mounting brackets: 48 in-lbs (5.4Ntm)
max; without mounting brackets: 10 in-lbs (1.1Ntm) max.