12 Volt Diesel Glow Plug Tester Analyzer For Car & Truck NEXAS Model: DGP301

Description

NEXAS
DGP301
Glow Plug Tester provides fault detection thru LED's for a quick analysis of short circuit over
current normal operation
and
open circuit / under current
Tester allows for testing without removing glow plug from engine and powers the glow plug to test the plug in its operating state
Much more accurate test than a cold resistance test which can miss short circuits
Tester uses a current measurement to accurately determine proper operation and check for short circuits
OPERATING INSTRUCTIONS:
Designed To Work On 12V ONLY !
Disconnect the busbar or leads from the glow plugs to be tested
Connect the RED battery clamp to the positive terminal of the battery, and the BLACK battery clamp to the negative terminal of the battery
Push the contact plate in the end of the test probe onto the glow plug
Terminate until the glow plug has warmed up. This might take between 3 and 20 seconds (Check manufacturers specs for exact warm-up time)
Check which LED is illuminated on the control panel
Included:
Main Unit, Battery Clip Cables & Test Probe.