5 Ton Hydraulic Gear Puller Pulling Pumps Oil Tube Drawing Machine with Case

Description

Features:
Supergoodshop
Your best online business partner
Item Specifics
Brand
Unbranded
Material
carbon steel,cast iron
Maximum capacity
5T
Manufacturer Part Number
Does Not Apply
Ares travel
2 inches (50 mm)
Weight
Approx.7100g/250.4oz
UPC
Does not apply
Type
Hydraulic Puller
Set or Single Item
Set
Drive
Hydraulic
Minimum/maximum range
0"-5.51"(0-140mm)
Minimum/maximum transmission
4- 7.87"(100-200mm)
5 Ton Hydraulic Gear Puller Pulling Pumps Oil Tube Drawing Machine with Case
Features:
Made of forged steel, this hydraulic puller is very strong and durable, with good bearing capacity and long service life.
It is equipped with 3 pulling claws, which can be adjusted from high to low, and can be pulled with two or three legs according to different needs.
There is a handle that can be opened, which can be operated with very little operation and get great pulling force.
The safety overflow valve control switch on the pump body is ready to avoid oil pressure overload.
The hydraulic puller adopts the design of 360-degree pump head, which is easy to operate and easy to use. After rotation, it can quickly contact the working center according to the distance between the puller and the position center.
Suitable for traction hubs, flanges, gears and bearings, with a maximum carrying capacity of 5 tons.
Specification:
Material: carbon steel + cast iron
Ares travel: 2 inches (50 mm)
Maximum capacity: 5T
Minimum/maximum range: 0"-5.51"(0-140mm)
Minimum/maximum transmission: 4-  7.87"(100-200mm)
Weight: Approx.7100g/250.4oz
Usage and precautions:
1. Please put the open handle end into the puller shaft and tighten the shaft according to the clock direction.
2. Adjust the jaws to maintain proper distance and Angle from the pulling position.
3. Rotate the handle to make the piston shaft move, and promote the power of the jaw to disengage the object.
4. The maximum stroke of this hydraulic puller is 50mm, please pay attention when using it, so you may need to try many times when the object is still in the position that meets the requirements of the stroke.
5. To return the piston starting rod, simply use the grooved end of the handle and rotate the return stem counterclockwise.
6.Don't overload.
7. Use (GB443-84) oil N15 at -5℃~ 45℃, the spindle oil (GB442-64) synthesis in-20℃~-5℃.
8. The machine uses oil as the medium, so the oil and the machine must be kept together.
9. With a new setting or a long setting, the hydraulic puller can be loaded 2 to 3 times to eliminate the air cavity since there is a large amount of air in the cylinder and the rod may have a small sudden jump when starting. Although the gear puller is out of use for a long time, you should reciprocate the gear puller 2-3 times a month.
Package list:
1 x Hydraulic Puller
1 x Handle
1 x 2/3 Leg Puller Yoke
3 x Jaws
6 x Nuts and Bolts
6 x Link Plates
1 x Nose Adapter
1 x Carrying Case
Payment
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note after you place orders.
Shipping
Hello, we will arrange delivery for you within the time set by the listing
Returns
In the unlikely event that a return is request, all returns must include all original items undamaged, in re-saleable condition.
Refund request is available within 1 Month and Exchange request is available in 1 months after parcel received & returning the item as the same condition as received.
Contact Us
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5 stars
" in very area
3. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
4. We greatly appreciate your POSITIVE feedback.
Please do NOT leave negative feedback without asking for help.
Thanks!
Supergoodshop
Your best online business partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
5 Ton Hydraulic Gear Puller Pulling Pumps Oil Tube Drawing Machine with Case
Features:
Made of forged steel, this hydraulic puller is very strong and durable, with good bearing capacity and long service life.
It is equipped with 3 pulling claws, which can be adjusted from high to low, and can be pulled with two or three legs according to different needs.
There is a handle that can be opened, which can be operated with very little operation and get great pulling force.
The safety overflow valve control switch on the pump body is ready to avoid oil pressure overload.
The hydraulic puller adopts the design of 360-degree pump head, which is easy to operate and easy to use. After rotation, it can quickly contact the working center according to the distance between the puller and the position center.
Suitable for traction hubs, flanges, gears and bearings, with a maximum carrying capacity of 5 tons.
Specification:
Material: carbon steel + cast iron
Ares travel: 2 inches (50 mm)
Maximum capacity: 5T
Minimum/maximum range: 0"-5.51"(0-140mm)
Minimum/maximum transmission: 4-  7.87"(100-200mm)
Weight: Approx.7100g/250.4oz
Usage and precautions:
1. Please put the open handle end into the puller shaft and tighten the shaft according to the clock direction.
2. Adjust the jaws to maintain proper distance and Angle from the pulling position.
3. Rotate the handle to make the piston shaft move, and promote the power of the jaw to disengage the object.
4. The maximum stroke of this hydraulic puller is 50mm, please pay attention when using it, so you may need to try many times when the object is still in the position that meets the requirements of the stroke.
5. To return the piston starting rod, simply use the grooved end of the handle and rotate the return stem counterclockwise.
6.Don't overload.
7. Use (GB443-84) oil N15 at -5℃~ 45℃, the spindle oil (GB442-64) synthesis in-20℃~-5℃.
8. The machine uses oil as the medium, so the oil and the machine must be kept together.
9. With a new setting or a long setting, the hydraulic puller can be loaded 2 to 3 times to eliminate the air cavity since there is a large amount of air in the cylinder and the rod may have a small sudden jump when starting. Although the gear puller is out of use for a long time, you should reciprocate the gear puller 2-3 times a month.
Package list:
1 x Hydraulic Puller
1 x Handle
1 x 2/3 Leg Puller Yoke
3 x Jaws
6 x Nuts and Bolts
6 x Link Plates
1 x Nose Adapter
1 x Carrying Case
Item Specifics
Brand :
Unbranded
Material :
carbon steel,cast iron
Maximum capacity :
5T
Manufacturer Part Number :
Does Not Apply
Ares travel :
2 inches (50 mm)
Weight :
Approx.7100g/250.4oz
Type :
Hydraulic Puller
Set or Single Item :
Set
Drive :
Hydraulic
Minimum/maximum range :
0"-5.51"(0-140mm)
Minimum/maximum transmission :
4- 7.87"(100-200mm)
Payment
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note after you place orders.
Shipping
Hello, we will arrange delivery for you within the time set by the listing
Returns
In the unlikely event that a return is request, all returns must include all original items undamaged, in re-saleable condition.
Refund request is available within 1 Month and Exchange request is available in 1 months after parcel received & returning the item as the same condition as received.
Contact Us
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5 stars
" in very area
3. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
4. We greatly appreciate your POSITIVE feedback.
Please do NOT leave negative feedback without asking for help.
Thanks!
All right reserved.
Shop Category
Store Home
Other
Hot Item
3" Universal Car Cold Air Filter Feed Enclosed Intake Induction Pipe Hose Kit US
USD 38.89
12pcs 8-19mm Metric Flexible/Fixed Spanners Ratchet Wrench Polished Tool Set Kit
USD 35.14
USA! Car Electric Jack Hydraulic Floor 12V DC 2/3 Ton Lift Scissor Jack Repair
USD 57.99
6/12 pcs 8-19mm Metric Flexible Head Ratcheting Wrench Combination Spanner Tool
USD 22.79
Universal Car Decorative Air Flow Intake Hood Scoop Vent Bonnet Cover US
USD 18.59
New List Item
Waterproof Car Cover All Weather Protection Dustproof for Honda FIT Hatchback
USD 29.99
11 Pc Brake Pipe Flaring Tool Kit Fuel Repair Tube Cutter Single Double Flares
USD 31.99
Full Car Cover 100% Waterproof Rain Snow UV Resistant Protection for Audi S4/S5
USD 42.99
3 Ton 12V Car Jack Automotive Electric Scissor Lift Auto Repair Floor Lift Tool
USD 92.14
Car Cover Sun UV Rain Snow ProtectionWaterproof Dustproof for Audi A3 Hatchback
USD 28.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us