AXK Series Thrust Needle Roller Bearing With Two Washers 20 Sizes Steel Sealed

Description

Description:Carbon motor brushes are one of the most commonly replaced power tool components. Since carbon brushes are wear and tear items, meaning that through friction and using they will gradually wear away, they eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed , chop saw, blower motor, cut-off saw and angle grinder.NOTE:Please replace brushes every 60 hours
Features:
This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.
These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.
Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.
Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
AXK series thrust needle roller and cage assembly, which can be used interchangeably with the FNT assembly, has a one-piece cage. The cage is similar in design to the successful profi led radial steel cages. These cage assemblies have a very thin section and when they must run directly against the backup surface raceways, their section may be 2.000 to 5.000 mm (0.0787 to 0.1969 in.) – equivalent to the diameter of the needle rollers used. When the backup surfaces cannot be hardened and ground, hardened washers of different thicknesses are available.
Specification:
Bearing material: high carbon chromium bearing steel (full hardening type) (GCr15)
Cage material: spring steel
( Size: ID X OD X T )
size: 20mmx35mmx4mm
Model: AXK2035
size: 8mmx19mmx3.5mm
Model: AXK0819
size: 25mmx42mmx4mm
Model: AXK2542
size: 1mm7x30mmx4mm
Model: AXK1730
size: 30mmx47mmx4mm
Model: AXK3047
size: 35mmx52mmx2mm
Model: AXK3552
size: 40mmx60mmx5mm
Model: AXK4060
size: 45mmx65mmx5mm
Model: AXK4565
size:50mmx70mmx5mm
Model: AXK5070
size: 55mmx78mmx5mm
Model: AXK5578
size: 60mmx85mmx5mm
Model: AXK6085
size: 65mmx90mmx5mm
Model: AXK6590
size: 70mmx95mmx6mm
Model: AXK7095
size: 75mmx100mmx6mm
Model: AXK75100
size :80mmx105mmx6mm
Model: AXK80105
size:85mmx110mmx6mm
Model: AXK85110
size: 90mmx120mmx6mm
Model: AXK90120
size: 100mmx135mmx6mm
Model: AXK100135
size: 110mmx145mmx6mm
Model: AXK110145
size: 120mmx155mmx6mm
Model: AXK120155
Package: 1pcs
ABOUT US
SHIPPING
RETURNS
We believe in FACTORY DIRECT purchases.
Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.
We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy.
"Utoolmart", our brand is also sold in other shopping site , please don't worry.
Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Note:Chile ,Brazil ,South Korea customs requires that all Chilean consignees need to provide RUT NUMBERS (or ID Card No)
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service.
We will reply your mail within 48 hours normally. sometimes have a little delay due to the weekend or holiday
.
We left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated.
Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.
If any question, please feel free to contact us via 'Ask seller a question' ,We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.Please allow 1-2 business days for us to response.
Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, if no response for you within 48 hours, please check the spam / junk folder in your mail box.
Description
Policy
A Variety of Sizes Carbon Brushes Brush for Generic Electric Motor Replacement
Description:
Carbon motor brushes are one of the most commonly replaced power tool components. Since carbon brushes are wear and tear items, meaning that through friction and using they will gradually wear away, they eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.
The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed , chop saw, blower motor, cut-off saw and angle grinder.
NOTE:
Please replace brushes every 60 hours.
Item Specifics
MPN
Does Not Apply
Brand
Uxcell
Tool Part Type
Carbon Brush
Application
Electric Motor
groupName
Carbon Brush Size
Carbon Brush Holder Cap Motor Plastic Cover Black 18mm OD 6mm Height 10pcs
GBP
4.38
1 Pair 30x12x9x6mm Carbon Brushes Power Tool for Electric Hammer Drill Motor
GBP
3.85
2Pairs 16x13x6mm 153A Carbon Brushes Power Tool for Electric Hammer Drill Motor
GBP
4.06
10 Pairs 16x10x6mm Carbon Brushes Power Tool for Electric Hammer Drill Motor
GBP
7.09
10 Pairs Electric Drill 5mm x 8mm x 15mm Motor Carbon Brushes Spare Part
GBP
4.91
5 Pairs Replacement Carbon Brushes 4mm x 4mm x 13mm for Generic Electric Motor
GBP
5.47
Hot Item
Pair Carbon Motor Brushes Spare Part Power Tool 5mm x 10mm x 15mm
GBP 3.41
Replacement 10/16" x 3/8" x 1/4" Motor Carbon Brushes 20 Pcs
GBP 9.69
2Pcs 13mm x 6mm x 4mm Carbon Brushes Repairing Part for Generic Electric Motor
GBP 3.16
20 Pairs 12x9x6mm Carbon Brushes Power Tool for Electric Hammer Drill Motor
GBP 8.63
Pair 10x8x5mm Carbon Brushes Power Tool for Electric Hammer Drill Motor
GBP 3.8
PAYMENT
We ONLY accept Paypal.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended..
SHIPPING
International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
All items will be dispatched from our warehouse in China or Hong Kong directly.
We will ship worldwide EXCEPT Italy, Nigeria, Vietnam, India, Indonesia, Malaysia, Philippines, Thailand, India, China, Hong Kong, Macau Due to Custom restrictions, we do not ship lighters to US We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
RETURNS
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
Buyers are responsible for the return shipping costs under any circumstances.