Black Basecoat Paint Quart & Medium Urethane Reducer GM WA8555 HFP250 HIGH TECK

Description

High Teck HFP-Series Quart Black Urethane Basecoat
And A Quart Of Medium Reducer
HFP250 COMPARE TO: GM WA8555 EBONY BLACK
National rule product
A quick dry, good hiding, factory pack basecoat
Ideal for overalls and large blend area repairs
A great ground coat for use under other basecoat colors
There are to many color variances for this color to be able guarantee a factory color match
APPLICATION
Surface Prep
For Dry Sanding   Final sand with 500-600 Grit
For Wet Sanding   Final sand with 800-1000 Grit
Clean area with Wax and Grease Remover and wipe dry with a clean cloth
Tack Cloth any dust or dirt particles
Mixing
Normal           1 Part Color, 1 Part Urethane Reducer
Better Hide     2 Parts Color, 1 Part Urethane Reducer
<10%              Hardener(optional)
Spray Gun Set-Up
Gravity Feed             1.3-1.5mm         30 PSI at the gun inlet
Gravity Feed HVLP   1.3-1.5mm         10 PSI max at air cap
Coats
Apply 2-4 coats or until full coverage is achieved
Allow each coat to flash off 5 to 10 minutes between coats
Allow 20 minutes flash time after last color coat to apply clearcoat.