Injector Remover Puller Tool. Fits Cummins® 12V 1st and 2nd Gen (89 ? 98) CIP030

Description

Tork Injector Puller Remover Tool CIP030
Tork Teknology
Feedback
Contact Us
Add to Favorite
Subscribe to our newsletter to receive info on discount codes, latest products, stock updates and more...
Find instructions for all our tools by clicking the button below.
CUMMINS® 12 VALVE INJECTOR REMOVER TOOL CIP030
Item Description
PULLS 1989 TO 1998 CUMMINS® 12 VALVE INJECTORS FAST !
INEXPENSIVE HEAVY DUTY TOOL
CIP030 WORKS ON 6BT AND 4BT CUMMINS
®
INJECTORS
Did you ever wish there was an easier way to remove Cummins® 5.9 0r 3.9 diesel injectors? The Tork Tool Cummins®Injector Puller is the answer to pulling stuck injectors FAST! This heavy duty tool was designed to remove Cummins®6BT and 4BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.
We designed this injector tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.
GUARANTEED TO PULL YOUR CUMMINS® DIESEL INJECTORS
Replacement of your Dodge® Cummins® 12V diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!
This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.
THREE INJECTOR REMOVER MODELS TO CHOOSE FROM
The Tork Tool CIP030 Cummins® diesel injector puller will work on the large injectors from 94 to 98 and the small Cummins®injectors from 89 to 93. The CIP010 works on the small Cummins® injectors from 1989 to 93 only. The Tork Tool CIP020 is for 1994 to 98 Cummins® diesels. Detailed instructions are included in the kit.
QUICKLY REMOVES STUCK CUMMINS® INJECTORS !
All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins® injectors with our tool, or you get your money back.
Order yours today and see how easy it is, to pull your Cummins® 12V injectors!
This is what our customers are saying about the Cummins® 12 valve injector puller:
D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"
L. Luther said this about the injector puller,
"The puller worked wonderful!"
T. Dought had this to say, "Slick little tool. Works
GREAT."
Joe Hill. "You look like you are making some high quality tools."
Vaun Johnson said this about our injector puller, " it looks like a good design that should be better on the injectors than the slide hammer method."
Big Bill had this to say, "the injector puller worked
GREAT!!"
Joe Wieber uses the injector puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!"
Tork Teknology article number one, on the Cummins® fuel system and Carter® lift pump, is done. Feel free to share the link with your diesel friends. We made hundreds of tests on the P7100 fuel system and the information is available to you, for free!
Tork Teknolgogy Article Series - The Cummins® Lift Pump
Use this link for the Tork Teknology Cummins® Injector Puller instructions
Do you need help in selecting the right Cummins® Injector Removal Tool ?
Payments are sent via PayPal.
At this point, we are only shipping to the United States, Canada and Great Britain.
99% of the orders shipped are by USPS. Why? Simple, the postal service is just as quick as UPS and costs much less. Secondly, USPS will leave your package in your postal box.... out of sight of potential thieves. UPS will leave your package on your steps or by the door. We all know someone that has had a package stolen when UPS left your package by your door.
Small items are shipped via First Class Mail while the heavier items are sent by Priority Mail.
Our return policy for Tork products is straight forward. You may return any Tork Tek or Tork Tool within 30 days of your purchase. No questions asked! We want you to be 100% pleased with your purchase. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within 10 days of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (2 to 6 business days), the time it takes us to process your return once we receive it (1 business day). If you paid by a debit or credit card, we will debit your account the same day.
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Trademarks featured or referred to within Tork Teknology website or Ebay® listings are the property of their respective trademark holders. These trademark holders are not affiliated with Tork Teknology, our products, or our website. They do not sponsor or endorse our company or products. The trademark names are listed for reference purposes only.