Inkbird 110V 10A Temperature Controller Thermostat Home Brew Seed Germination US

Description

Inkbird Prewired Programmable Temperature controller Thermostats :ITC-308(Heating & Cooling) & ITC-306T(Only Heating)
ITC-308 (Heating & Cooling sockets): Inkbird Digital Pre-wired 240V Temperature Controller Thermostats Home Brew ,Sous vide...
Features:
- Plug and play design, easy to set & use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with
Centigrade or Fahrenheit unit
; Maximum output load: 1200W(110V),2400W(240V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Compressor delay protection for refrigeration control High and low temperature alarms are available;
- Over-temperature and sensor fault alarm Temperature calibration;
-
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Alarm when over-temperature and sensor error
Specification：
- Temperature Control Range :
-50~99 °C / -58~210 ° F
Temperature Set Value ：  -50～210°F/-50~99.9°C
Heating Differential Value： 0.3～15℃/1～30℉
Cooling Differential Value：  0.3～15℃/1～30℉
- Temperature Resolution: 0.1 ° C / 0.1° F
- Temperature Accuracy:±1°C (-50~70°C) / ±2°F (-58~160°F)
- Temperature Control Mode :
On/Off Control, Heating and Cooling ,Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output: Max. 10A, 100V ~240V AC  (It can apply to the voltage from 100V to 240V)
- Buzzer Alarm:
High and Low ,Temperature Alarm
- Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) Socket: 85x42x24mm(3.3x1.7x1inch)
- Sensor Type:
NTC sensor (Including) Sensor Length: 2m / 6.56ft
- Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
- Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate)
- Warranty: 1 Year
How to work:
This item can connect a cooling and heating device to control a temperature range.
For example,connect with fan and heater, the temperature range is 27~31°C，then set TS=29，HD=2，CD=2.
When the temperature is over than 31°C (TS+CD), it will turn on the fan, turn off at 29°C (TS).
When the temperature is lower than 27°C (TS-HD), it will turn on the heater, turn off at 29°C (TS).
ITC-306T (only heating sockets): Temp. Controller With day & night Timer ,using in Aquarium,Fishing Keeping etc
Main features:
1.  ITC-306T is a pre-wired heating output temperature controller(No Cooling Controller) with time function specifically for breeding and planting.
2.  It can be set to two different temperatures with
its function of dual time cycle setting during 24 hours according to the day and night
, which can more suitable for the physiological needs of animals and plants.
3.  It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
4.  This plug and play product is designed with dual LCD display,
5.  It offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control.
6.  With large power output 2400W, it's suitable for most applications.
7.  Day & night Timer function can be switched off.
8.  The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
- Temperature Control Range:
-50~99 °C / -58~210 ° F
- Temperature Resolution: 0.1 ° C / 0.1° F
- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
- Input Power : 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output:
Max. 10A, 100V ~240V AC
- Sensor Type:
NTC sensor (Including) ;Sensor Length: 2m / 6.56ft
- Relay Contact Capacity: Heating (10A, 100-240VAC)
- Input Power Cable Length: 1.5m (5ft)
- Output Power Cable Length: 25cm (1ft)
- Dimension: Body:140x68x33mm (5.5x2.7x1.3 inch.)
- Socket:85x42x24mm (3.3x1.7x1 inch.)
- Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
- Storage: Temperature -20~ 60 ° C / -4~ 140 ° F
- Humidity 20~85% (No Condensate)
- Warranty: 1 Year
How to work:
Connect with two heaters to maintain a stable temperature range., two heater will turn on/off at the same time at the same temperature.
Without timer function:
For example: the temperature range is 27~29°C, Two heaters will turn on when temperature ls lower than 27°C,turn off at 29°C.
With timer function: For example:
08:00~16:00,the temperature range : 27~29°C,Two heaters will turn on when temperature ls lower than 27°C,turn off at 29°C.
16:00~08:00,the temperature range : 30~35°C,Two heaters will turn on when temperature ls lower than 30°C,turn off at 35°C.
Package Content(Depends on your choice):
ITC-308 (Heating & Cooling)Package:
1x ITC 308 Temp Controller with Metal probe
1x English User Manual
ITC-308 (Heating & Cooling)Package:
1x ITC 308 Temp Controller with Rubber probe
1x English User Manual
ITC-306T (Only Heating)Package:
1x ITC 306T Temp Controller with Metal probe
1x English User Manual
ITC-306T (Only Heating)Package:
1x ITC-306T Temp Controller with Rubber probe
1x English User Manual
On Mar-31-21 at 01:24:25 PDT, seller added the following information: