Power Probe Circuit Tester 6V 24V Test Device System Digital Car Automotive Scan

Description

Power Probe Circuit Tester 6V 24V Test Device System Digital Car Automotive Scan
Description
Specification:
Type: Probe / Circuit Tester
Operation voltage: 6-24V DC (The tester needs to be connected to the vehicle battery before it can be used.)
Overload protection: 7A (When the current exceeds 7A, this item will disconnect the current automatically.)
Material Type: plastic and stainless
Cable length: approx. 4M / 157.5inch
Item Length: 225mm / 8.85inch
Item Width: 30mm / 1.18inch
Note:
This electrical tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage.
Package includes
1x Electric Circuit Tester
1x Manual
Product Highlights
🚗Suitable for diagnostic in all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which can help you reduce diagnostic time in automotive electrical systems.
🚗Can help you quickly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, it can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead.
🚗Power circuit probe tester could activate components in and out of the vehicle’s electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester.
🚗The cable length of the circuit tracer is about 4m(13ft) which allows you access and test any electrical system easily. The LED indicator and buzzer warning can help you clear problems at a glance. Test light adopts advanced high sensitivity probe, which provides you quick and accurate detection. Its clips with strong bite force which not easy to fall off.
🚗Before you test a circuit or component, the test light can perform a quick self-test to ensure your tool is in good condition. Equipped with overload protection, when the current exceeds 7A, the circuit tester will disconnect the current automatically and give you a buzzer prompt.
🚗When the circuit breaker trip is detected, the power circuit probe tester will sound a prompt to remind you that there is a short circuit problem. Then it will automatically reset within 3 to 5 seconds(the prompt sound will automatically turn off.