-40%

Pro Automotive Short & Open Finder Circuit Tester Wire Tracker DC 6-42 V Probe

$ 14.25

Availability: 352 in stock
  • Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
  • Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
  • Return shipping will be paid by: Buyer
  • Warranty: 1 Year
  • Item must be returned within: 30 Days
  • Features: Continuity Testing
  • Accessories: User Guide
  • Probe length: 7 "flexible probe
  • Vehicle Type: ATV
  • UPC: 788537552406
  • Item Weight: 280 g
  • Power Supply: 9V battery (6F22), 2 PIECES
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: all-sun
  • Volt: 6-42V
  • Country/Region of Manufacture: China
  • Returns Accepted: Returns Accepted
  • Manufacturer Part Number: allsunEM415pro
  • Condition: New

    Description

    Shop Category
    Store Home
    HOME METER
    ◈  Stud Finder
    Pro Automotive Short & Open Finder Circuit Tester Wire Tracker DC 6-42 V Probe
    Some package content may not include batteries for the restriction of some logistics.
    This instrument is designed to identify and trace wires or cables without damaging the insulation. You can also use it in checking for short circuit and loacting open circuit and so on. There are a Sender and a Receiver included in the instrument.
    Please kindly note it, the cable wire tracker needs to install 2 X 6F22,9V batteries, one is for the receiver,
    the other is for the sender.(For customs reason,battery may not include in the package.)
    Function
    Tracing of wires is made possible even inside bundles, conduits, behind  panels, under carpets, upholstery, etc
    Easy to use: simply connect the transmitter in series with the circuit or wire  under test, (i.e.: in place of a blown fuse, across a connector, in series with  an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the  tracers flexible probe to find the trouble spot
    42 V Ready: for use in the new generation of vehicles with mixed or single 42  Volt systems
    Operates on DC voltages from 6 to 42 volts
    Internally protected against power surges and overloads
    7" flexible probe allows reaching wires in congested places
    Transmitter and Receiver LEDs show open or short circuit conditions
    Adjustable sensitivity for all tracing situations
    No wire piercing required, non-contact technology!
    How to use this probe?
    The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas. Depending on the circuit  characteristic and sensitivity settings, the probe will pick up the signal from  the wire in a range of positions. However, for the best possible range the Receiver’s probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
    Caution
    1.Only for us on DC voltage,don't connect to circuit exceedomh 42 volts DC under any circumstances
    2.Do not use on AC voltage
    3.Do not use on any circuit directly or indirectly connected to AC lines or any other AC power source
    4.
    Do not use with any component or circuits of the ignition system
    5.Before using this device,check the vehicle's electrical wiring and disconnected any part or system sensitive to
    voltage and current pulses such as air bags,electronic control modules,etc
    6.After you finish checking vehicle,make sure you have correctly restored all the connections which you disconnected
    7.Always follow the instructions and procedures indicated in the vehicle's service manual before attempting
    to disconnect any part of subsystem of theelectical circuit
    Accessories
    1 x Automotive Short and Open Finder
    Sender
    1 x Automotive Short and Open Finder
    Reciever
    2 x 9V,6F22 Battery
    1 x Carrying Pouch
    1 x English User Manual
    Standard Factory Packaging
    Application
    Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
    Payment
    1.We accept PayPal only.
    2.All major credit cards are accepted through secure payment processor PayPal.
    3.Payment must be received within 7 business days of auction closing.
    4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    Shipping
    1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    2.Items will be shipped within 1-3 business day when we received payment.
    3.Delivery time depends on destination and other factors;
    4.International buyers please note:
    a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
    b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
    Returns
    Returns Accepted, Buyer, 30 Days, Money back or exchange (buyer's choice)
    1.Incoming damaged or defective when you receive, please contact us within 2 days after receiving the item.
    2.Replacement or refund will be proceeded once defect confirmed.
    3.Please be reminded when return, the items should be with original condition ( original packing,  accessories, unused item…).
    4.Except incoming defect, returning shipping fee is handled by buyer.
    Contact Us
    Please feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.
    All rights reserved.
    Powered by SoldEazy