Viofo HK3-C 3-Wire Hardwire Kit for the A139 Series Dash Cameras

Description

Viofo HK3-C 3-Wire Hardwire Kit for the A139 Series Dash Cameras
Viofo HK3-C 3-Wire Hardwire Kit for the A139 Series Dash Cameras
This is the Viofo 3-wire hardwire kit (HK3-C) specifically for the A139 series dash cameras. This kit is required if you want the camera to automatically and enter parking mode once the vehicle engine has been shut off.  This kit has a type C connector and is only compatible with the A139 series dash cameras.
4 voltage cutoff selection points - 12.4V, 12.2V, 12V and 11.8V (24.8V, 24.4V, 24V and 23.6V if your vehicle has a 24V system).
Three parking mode recording options (in the settings):
Auto Event Detection:
Automatically record when detecting moving objects or impact while car is parked.  This is Buffered parking mode on the A139.
Time Lapse:
Photography at specified intervals so that they can be played back much faster than real time.
Low Bitrate Recording:
Constantly recording video, but at a low bitrate to save storage space.
The overall length of the kit is about 13 feet (4 meters).  From the tap ends of the red, yellow and black wires (where they tap into the fuse box) to the converter box is about 3.25 feet.  From the converter box to the miniUSB plug is about 9.8 feet.
*
There are 5 options to choose from.  You can purchase the 3-wire kit only or with any of the 4 Tap-A-Fuse kits we carry.  If you order with a Tap-A-Fuse kit, you will receive the Viofo 3-wire hardwire kit plus 2 of the Tap-A-Fuse wire kits of your fuse type, as the Viofo 3-wire kit requires you to tap into 2 different fuses in your vehicles fuse box.  Each Tap-A-Fuse wire with come with a 5A fuse.
Please be sure to know exactly which fuse type your vehicle has before ordering this hardwire kit with a Tap-A-Fuse kit.  We try to be as accurate as possible with fuse types, but there are many different types and names which tend to change depending on which resource your using.  Please see the picture below to identify your fuse type.  This is how we have labeled our Tap-A-Fuse kits.  Please contact Capture Your Action if you have any questions before purchasing.
**
All three wires need to be connected for the kit to function correctly.
Listing and template services provided by inkFrog